(주)발만인스트루먼트 - 산업용내시경,비상샤워기,증류수보충장치

적외선 온도분석시스템 EL은 전자산업 전반에 걸쳐 사용가능한 장비이다.

- PCBA(printed circuit board assembly) 의 쇼트나 다른 결함을 쉽게 찾을 수 있다.
- 잠재되어 있는 결함 발견
- 부품의 온도특성 분석
- 온도 관리 시스템 평가

- 0.1°C의 온도분해능

- 100 µm pixel 이상의 공간분해능

- 자동 "Golden Board" 비교 검사

Step 1 - Create Model

Create a "golden board" model by analyzing a non-defective PCBA. Images below show temperature changes during the analysis.

Step 2 - Analyze

Compare a PCBA to the model. Areas on the PCBA with temperature values outside the limits of the model are highlighted.

Step 3 - Locate Defect

Locate the source of defects by overlaying a visual image of the PCBA over its thermal image.

- 가격, 기능을 고려시 가장 적당한 Thermal Imaging System

circuit board troubleshooting

electrical connector design

cardiovascular diagnosis research

heating element design

packaging design

electronics inspection

Measurement
Temperature Range:	-20 to 250°C (-4 to 482°F)
Spatial Resolution:	0.1 mm (0.004 in) minimum
Accuracy:	+/-2°C or 2% of reading (whichever is greater)
Sensitivity (NETD):	<0.1°C
Sample Rate:	30 frames per second

Optics
Field of View:	17° x 12°
Focus Distance:	20.3 cm (8 in) to infinity
Field of View:	50° x 35°
Focus Distance:	1.4 cm (0.55 in) to infinity

Physical
Ambient Operating:	12 to 32°C (53.6 to 89.6°F)
Ambient Storage:	-40 to 80°C (-40 to 176°F)
Camera Dimensions:	6.35 x 6.35 x 19.69 cm (2.5 x 2.5 x 7.75 in)
Camera Weight:	680 gm (1.5 lb)
Power Consumption:	1.2 W
Mounting:	1/4"-20 internal threads

Detector
Thermal Time Const:	< 21 msec
Start-Up Time:	< 15 sec
Detector:	Uncooled focal plane array
Array Size:	160 x 120 elements
Spectral Response:	7-14 µm
Moving Parts:	Micro shutter (focal plane array touch up)