(주)발만인스트루먼트에 오신 것을 환영합니다 ^^

산업용내시경
Straightpoint 텐션메타
ALLIED 시편가공기기
X-ray&CT 검사장치
현미경
경도 시험기
증류수제조기(필라델피아)
비상샤워기(Guardian)
Universal Testing Machine
시험장비/시편가공기기
RION 소음/진동계
Dietert 주물사시험기
전기/전자 계측기
가스/초음파누설 측정기
물리량/물성 측정기
탭밀도측정기/기타 측정기
OLYMPUS
XENCO
DT
Crane Scale
Tension Scale
Loadcells
기타
시편절단기
마운팅프레스
폴리싱(그리인딩)
대형절단기
소모품
CT Inspection
X-ray
에코팁경도계
초음파경도계
로크웰경도계
브리넬경도계
비커스경도계
마이크로비커스경도계
고무/플라스틱경도계
표준시편
기타/악세사리
만능재료시험기
시편절단기
마운팅프레스
폴리싱머신
내후성시험기
드라이오븐
마킹시험기
Schap 시험기
충격시험기
열화상카메라
전력품질분석기
절연저항측정기
접지저항측정기
클램프메타
멀티미터
케이블 테스트기
다기능/임피던스/RCD테스터
레코더
표준저항측정
BATTERY 측정기
모터회로분석기
가연성가스측정기
냉매가스측정기
복합가스측정기
단일가스측정기
초음파누설탐지기
VOC측정기
연소가스측정기
점도계
융점측정기
현재위치 : Home > 전기/전자 계측기 > 레코더 > 레코더 RA2300
레코더 RA2300
상품가격 : 가격문의
제조원/원산지 : NEC San-ei/일본
구매수량 :
결제금액 : 가격문의
Data Acquisition System

Data Acquisition System

OMNIACERA2300

RA2300
RA2300
brochure(623kB.PDF)

FEATURES

Simple“Pen-recorder”Mode
Visualized amp.setting-display & touch panel provide simple operation like Pen-Recorder.
Dynamic wave form in Wide Display
12.1 inches TFT color display improves visibility of measuring data
Direct input from Sensors
11 types of input amp. are available for Voltage, Strain, Temp, Vibration,Pressure, F/V and other signal input.
Large size HDD like 120days-recording
Built-in large capacity 40GB HDD enables 120 days-recording (based on sampling speed 10ms, 16ch)
High-speed thermal printing
Chart speed 100mm/s (recording density : 20 dots/mm) to 1mm/min (recording density 80 dots/mm) is selectable.
16 ch Analog + 16 ch Digital
Max. 16ch signal inputs (8 slots) are prepared or various sensors. And 16ch Digital are available separately from these input slots at option, for measurement of diverse signal-timing and contact-condition.
Standard LAN and USB I/F
LAN (100BASE-T) for data communication, and USB (1.1) for connecting to external storage device are equipped as standard I/F.
 

Select most suitable measurement mode for your application
5 measurement modes are available, such as Pen-Recorder like pen-writing recording, HD-Recorder for long term recording.Each measurement mode is dedicated for each application. OMNIACE III RA2300 offers simple and certain operation for exact data acquisition.

Select Mesuring Mode

TC/DC amp (AP11-107)
This amp can be used as a thermocouple amp or DC amp. When temperature measurement using a thermocouple amp and voltage measurement using a DC amp are necessary, this amp is useful because no amp replacement is required.Moreover, four types of thermocouples, R, T, J, and K, can be connected and high-speed temperature measurement as fast as 10 µs is possible. This amp contains one channel per unit.

Event amp (AP11-105)
This amp is a logic amplifier that can input eight channels of voltage or contact signals. It is useful for measuring timing or contact signals.
Voltage input: Input voltage 0 to 24 V
H level: 2.5 V or higher
L level: 0.5 V or lower
Contact input:
Open: 2 k or higher
Short: 250 or lower

2-ch AC strain amp (AP11-104)
This amp is a 2-channel amplifier that inputs signals from strain gauges or straingauge based sensors. Due to the AC bridge type, it features high noise resistance(against the noise caused by the line voltage), high stability, and a high resolution of 16 bits. Low-noise measurement is possible for measurement using strain gauges, which do not have any shielded wires.
Auto-balance
Bridge voltage: 5 kHz, 2 V rms
Response frequency: 0 to 2 kHz
Gauge factor adjustment function: 1.9 to 2.2

2-ch DC strain amp (AP11-110)
This amp is a 2-channel amplifier that inputs signals from strain gauges or strain gauge based sensors. Due to the DC bridge type, it features measurement of high-speed strain signals at a high resolution of 16 bits.
Auto-balance
Bridge voltage: 2 VDC, 5 VDC
Response frequency: 0 to 50 kHz

2-ch vibration/RMS amp (AP11-109)
This is a 2-channel amplifier that features a constant-current power supply for amp-embedded sensors, an RMS conversion function, and a band-pass filter.The RMS function in this amp is effective for monitoring the basic frequency level fluctuation in rotation equipment and the fluctuation of the AC power level.For vibration measurement, an amp-embedded charge sensor can be directly connected to this amp unit. For voltage measurement, 500 V (DC or AC peak values)can be directly input. In addition, the band-pass filter offers filtering of necessary frequencies to perform the RMS conversion so that clear waveforms for judgment are available.
Power for sensor: 2 mA/18 V or higher
Voltage measurement range: 100 mV to 500 V
Band-pass filter: -24 dB/oct
A/D: 16 bits

2-ch FFT amp (AP11-102)
This is a 2-channel amplifier that incorporates an anti-aliasing filter required for the FFT processing and the power for an amp-embedded sensor (constant current).The anti-aliasing filter has a dropout feature at -72 dB/1.5 fc so that the aliasing generated in FFT can be eliminated.
Power for sensor: 2 mA/18 V or higher
Voltage measurement range: 100 mV to 500 V
A/D: 16 bits
Fmax: 40 kHz

F/V converter (AP11-108)
This unit offers frequency-to-voltage conversion, which is useful in recording rotation changes and revolutions in rotation equipment.
Input frequency: 10 kHz max.
Response time: 20 ms (Range of 10 kHz)

2-ch high-resolution amp (AP11-101)
This is a DC amp that can record at a high resolution of 16 bits. Channels are isolated from each other and have a withstand voltage for input of 500 V max. (DC or AC peak values). This amp contains two channels per unit.

2-ch high-speed DC amp (AP11-103)
This is a DC amp that can acquire data at a high-speed sampling rate of 1 µs.Channels are isolated from each other and have a withstand voltage for input of 500 V max. (DC or AC peak values). This amp contains two channels per unit.

2-ch TC/DC amp (AP11-106)
This amp can be used as a thermocouple amp or DC amp. When temperature measurement using a thermocouple amp and voltage measurement using a DC amp are necessary, this amp is useful because no amp replacement is required.Moreover, five types of thermocouples, R, T, J, K, and W can be connected and high-speed temperature measurement as fast as 10 µs is possible. Channels are isolated from each other and have an input voltage of 50 V max. (DC or AC peak values). This amp contains two channels per unit.

Flaw Detection in Conveyor Line in Steel Mill Operation Test of Power Switchboards and Production Facilities
By using the filing function, which operates synchronously with external signals, data can be acquired for a long term. Since the RA1000 Series is small and compact, it does not occupy a large measurement space. The RA1000 Series is used to measure the operation timing of relays and voltage and current changes in the main power for operation.
Torque Measurement of Engines or Motors Wide Variety of Tests in Railroad Car
In automobile testing, measurement of revolution, strain, pressure, vibration, torque, temperature, etc is executed. The RA1000 Series incorporates a variety of amplifiers, which can eliminate the need to install separate amplifiers and thus enable operators to perform the tests in a small space.
By using the filing function of the RA1000 Series, long-term data storage in external media at a high sampling speed (200 µs max.) is possible.
The RA1000 Series can accept oil pressure, air pressure, and acceleration in its AC strain amp, and save the data in the MO directly. Since the RA1000 Series incorporates strain amplifiers, external amplifiers are not necessary, which makes the measurement system compact.
Also, a long-term multi-channel measurement is possible by using the filing function.
Governor Test Drop Test for Package
The RA1000 Series is used as a recorder for the governor test, in which changing signals such as water pressure, revolution, generator voltage, current, governor, stroke, and pressure regulation stroke are recorded.
Since the data saved in the memory can be automatically stored in a PC card, database creation is possible without expending excessive time and effort. After storing the data, you can confirm the data on the monitor, which eliminates errors caused by variations in reading by operators.
A drop test for packages is performed in order to avoid the damage that may occur during delivery of packaged electronic equipment.
Generally, packages contain materials for packing to absorb shock. This test measures the impact acceleration to obtain the data that is used for the improvement of materials for packing. There are two types of accelerometers that can be used in the drop test: a piezo-electric type or a strain gauge type. The RA1000 Series supports both types.
Monitoring of Vibration Level of Rotating Machine Magnus Test
In order to maintain rotating equipment such as motors, gears, bearings, piezo-electric accelerometers are used to check their vibration level.In this case, a band-pass filter that picks up the signals in the vicinity of the frequency of the rotation is used and RMS conversion is performed based on the signals so that the level changes become more visible.Waveform judgment setting is also possible. A Magnus test is a test to examine the response of a sample of tissue that expands or contracts, such as the blood vessel, enteron, or trachea of a mouse or rat, to the medicine applied to the sample.
This test requires a lot of repetition work. The filing and trigger functions of the RA1000 Series provide automatic processing of this work.Moreover, since strain amps can be incorporated, a tension sensor can be directly connected to the main unit,thus eliminating troublesome cabling.In addition, an operator can examine waveforms on the monitor during data acquisition and readout current values calculated by physical conversion.





 

회사소개   |   이용안내   |   이용약관   |   개인정보취급방침   |   Help Desk   |   Site Map  

 

  

 

상호 : (주)발만인스트루먼트  대표 : 임도수  

사업자번호 : 610-81-5248   통신판매업신고번호 : 제2018-울산중구-0128호 

주소 : 울산광역시 중구 함월12길 53  

전화 : 052-257-9430  팩스 : 052-257-9470 

E-Mail : parkbh@balmann.com